Know to transfer some or all of the FSMO Roles from one DC to another?
Moving the FSMO roles while both the original FSMO role holder and the future FSMO role holder are online and operational is called Transferring, and is described in this article.
The transfer of an FSMO role is the suggested form of moving a FSMO role between domain controllers and can be initiated by the administrator or by demoting a domain controller. However, the transfer process is not initiated automatically by the operating system, for example a server in a shut-down state. FSMO roles are not automatically relocated during the shutdown process - this must be considered when shutting down a domain controller that has an FSMO role for maintenance, for example.
In a graceful transfer of an FSMO role between two domain controllers, a synchronization of the data that is maintained by the FSMO role owner to the server receiving the FSMO role is performed prior to transferring the role to ensure that any changes have been recorded before the role change.
However, when the original FSMO role holder went offline or became non operational for a long period of time, the administrator might consider moving the FSMO role from the original, non-operational holder, to a different DC. The process of moving the FSMO role from a non-operational role holder to a different DC is called Seizing, and is described in the Seizing FSMO Roles article.
You can transfer FSMO roles by using the Ntdsutil.exe command-line utility or by using an MMC snap-in tool. Depending on the FSMO role that you want to transfer, you can use one of the following three MMC snap-in tools:
Transferring the RID Master, PDC Emulator, and Infrastructure Masters via GUI
To Transfer the Domain-Specific RID Master, PDC Emulator, and Infrastructure Master FSMO Roles:
To Transfer the Domain Naming Master Role:
To Transfer the Schema Master Role:
To transfer the FSMO roles from the Ntdsutil command:
Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of Active Directory functionality.
Options are:
Windows 2000/2003 Active Directory domains utilize a Single Operation Master method called FSMO (Flexible Single Master Operation), as described in Understanding FSMO Roles in Active Directory
In most cases an administrator can keep the FSMO role holders (all 5 of them) in the same spot (or actually, on the same DC) as has been configured by the Active Directory installation process. However, there are scenarios where an administrator would want to move one or more of the FSMO roles from the default holder DC to a different DC.Moving the FSMO roles while both the original FSMO role holder and the future FSMO role holder are online and operational is called Transferring, and is described in this article.
The transfer of an FSMO role is the suggested form of moving a FSMO role between domain controllers and can be initiated by the administrator or by demoting a domain controller. However, the transfer process is not initiated automatically by the operating system, for example a server in a shut-down state. FSMO roles are not automatically relocated during the shutdown process - this must be considered when shutting down a domain controller that has an FSMO role for maintenance, for example.
In a graceful transfer of an FSMO role between two domain controllers, a synchronization of the data that is maintained by the FSMO role owner to the server receiving the FSMO role is performed prior to transferring the role to ensure that any changes have been recorded before the role change.
However, when the original FSMO role holder went offline or became non operational for a long period of time, the administrator might consider moving the FSMO role from the original, non-operational holder, to a different DC. The process of moving the FSMO role from a non-operational role holder to a different DC is called Seizing, and is described in the Seizing FSMO Roles article.
You can transfer FSMO roles by using the Ntdsutil.exe command-line utility or by using an MMC snap-in tool. Depending on the FSMO role that you want to transfer, you can use one of the following three MMC snap-in tools:
- Active Directory Schema snap-in
- Active Directory Domains and Trusts snap-in
- Active Directory Users and Computers snap-in
| FSMO Role | Administrator must be a member of |
| Schema | Schema Admins |
| Domain Naming | Enterprise Admins |
| RID | Domain Admins |
| PDC Emulator | |
| Infrastructure |
To Transfer the Domain-Specific RID Master, PDC Emulator, and Infrastructure Master FSMO Roles:
- Open the Active Directory Users and Computers snap-in from the Administrative Tools folder.
- If you are NOT logged onto the target domain controller, in the snap-in, right-click the icon next to Active Directory Users and Computers and press Connect to Domain Controller.
- Select the domain controller that will be the new role holder, the target, and press OK.
- Right-click the Active Directory Users and Computers icon again and press Operation Masters.
- Select the appropriate tab for the role you wish to transfer and press the Change button.
- Press OK to confirm the change.
- Press OK all the way out.
To Transfer the Domain Naming Master Role:
- Open the Active Directory Domains and Trusts snap-in from the Administrative Tools folder.
- If you are NOT logged onto the target domain controller, in the snap-in, right-click the icon next to Active Directory Domains and Trusts and press Connect to Domain Controller.
- Select the domain controller that will be the new role holder and press OK.
- Right-click the Active Directory Domains and Trusts icon again and press Operation Masters.
- Press the Change button.
- Press OK to confirm the change.
- Press OK all the way out.
To Transfer the Schema Master Role:
- Register the Schmmgmt.dll library by pressing Start > RUN and typing:
regsvr32 schmmgmt.dll- Press OK. You should receive a success confirmation.
- From the Run command open an MMC Console by typing MMC.
- On the Console menu, press Add/Remove Snap-in.
- Press Add. Select Active Directory Schema.
- Press Add and press Close. Press OK.
- If you are NOT logged onto the target domain controller, in the snap-in, right-click the Active Directory Schema icon in the Console Root and press Change Domain Controller.
- Press Specify .... and type the name of the new role holder. Press OK.
- Right-click right-click the Active Directory Schema icon again and press Operation Masters.
- Press the Change button.
- Press OK all the way out.
To transfer the FSMO roles from the Ntdsutil command:
Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of Active Directory functionality.
- On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then click OK.
Microsoft Windows [Version 5.2.3790] (C) Copyright 1985-2003 Microsoft Corp. C:\WINDOWS>ntdsutil ntdsutil:- Type roles, and then press ENTER.
ntdsutil: roles fsmo maintenance: Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?, and then press ENTER.- Type connections, and then press ENTER.
fsmo maintenance: connections server connections:- Type connect to server
, where is the name of the server you want to use, and then press ENTER.
server connections: connect to server server100 Binding to server100 ... Connected to server100 using credentials of locally logged on user. server connections:- At the server connections: prompt, type q, and then press ENTER again.
server connections: q fsmo maintenance:- Type transfer
. where is the role you want to transfer.
Options are:
Transfer domain naming master Transfer infrastructure master Transfer PDC Transfer RID master Transfer schema master- You will receive a warning window asking if you want to perform the transfer. Click on Yes.
- After you transfer the roles, type q and press ENTER until you quit Ntdsutil.exe.
- Restart the server and make sure you update your backup.
Comments